We are still working on the 2500 scale Galactica and the 1/48 Raptors.  We hope to have BOTH available in the next month or two.  Unfortunately we have been side tracked with a Major Commission which is going to result in the Bad-Azz Master Series kits.  These won't be cheap but will be incredible!!!

 144th Squadron updates:

We are working hard to get some BSG and B5 kits up for sale soon.  So keep an eye out. 

JT-Graphics updates:

We are hoping to have a LOT of NEW releases soon. lately everyone has been restocking and have been filling the void from other manufactures.

A bit of BAD news though.  We have not raised deals prices since we started in 1999.   Unfortunately, we are going too.  Look for new prices in October.  We'll try to keep them as low as we can.

Additional News:

We hope to have an Accurate B/C deck and Bridge for the Old 650 scale (18") USS Enterprise models very shortly.  You just remove the old one and this one drops right in the hole.  Additionally we will have a bunch of Custom Parts for the old girl that include various fore and aft nacelle caps with many more items in the works.  Keep your eyes on the Resin Products page. - This is still on track but taking more time than we expected.

We have also begun working on Nacelle parts for the AMT Cut-Away USS Enterprise .  We hope to have those soon.

One last note.  We are completely revamping our Mailing Lists.  If you wish to be on it, please send us and email with the subject line of "Add to Email List".    

Now Available:

- 1/48 Razor Raider

- 1/4105 Scale Battlestar Pegasus. 

 144th Squadron updates:

Now Available:  144 scale versions of ST: Delta Flyer, Runabout, Type 6, Type 9, Type 13 and Type 13 Armored. 

JT-Graphics updates:

4105 scale landing Bay decals for the Moebius Models Battlestar Galactica.  JTG-MM02 (can be found under Decals>Starships>Misc.)

Additional News:

We hope to have an Accurate B/C deck and Bridge for the Old 650 scale (18") USS Enterprise models very shortly.  You just remove the old one and this one drops right in the hole.  Additionally we will have a bunch of Custom Parts for the old girl that include various fore and aft nacelle caps with many more items in the works.  Keep your eyes on the Resin Products page.

We will be adding a Gallery page.  On this page we will be highlighting models that were either purchased thru JT-Graphics or used JT-Graphics products.  Submit your to us via email today!!!

Our links page will be updated shortly.  On it you will find links or info. of Pro Builders who build for others.  Also, 3D artists/pattern makers, casters and more.  All come highly recommended by JT-Graphics.

One last note.  We are completely revamping our Mailing Lists.  If you wish to be on it, please send us and email with the subject line of "Add to Email List".    

It's April and Wonderfest is just around the corner.  So little to do and so much time........err, you know what I mean.

Bad-Azz updates:

- Razor Raider is Available for sale - Finally.  It's taken a long time but this the Galactica and the Berzerk are the last of our "old" way of making models.   The NEW ones we are working on look more like Styrene kits than resin ones. 

- We announced that we will be selling a 1/4105 Scale Battlestar Pegasus.  This ship (like all Bad-Azz kits) comes to you from the original CG, but this one has been modified.  We've taken the ships texture mapping and applied it to the hull plates.  Now they are all scribed!!  If you did this by hand you'd go nuts.   Will post pics soon as molds are made and casting has begun. 

Keep an eye out as I'm hoping to post a lot of "Coming Soon" stuff in the upcoming days.  

JT-Graphics updates:

Being a one man shop and a full time job has it's draw backs.  As you can tell the web site is limping along. Plus I have a house that needs work so time is very limited.

We are working on a few new decals and some customizing parts for the old 18" TOS Enterprise.  More on that in the upcoming weeks.  However, I will say that I have an accurate 18" B/C deck and bridge that is very easy to install.  You just cut the old one off, and plop the new one in the whole.   There will be a small gap to putty and you won't need the old grid that is no longer available on today's kits to use as cutting lines.  

Additional News:

We are proud to announce NEW model company.  The 144 Squadron.  They will be specializing in only 1 scale and I can bet you can guess what that is. These kits are AWESOME.  We were expecting to have 10-20 offerings from them at Wonderfest and they are trying their hardest to keep that promise.  More on them as time goes on.  (I'm trying to get some "Sneak Peak' pics now).

 My God it's November already.  Where does the time go?  Time for an update.

Bad-Azz updates:

- The Puddlejumper in finally up!  I didn't realize that I hadn't put in the info.

- Razor Raider is in rubber and casting should start any day.

- The ship on the "Sneak Peak" page is moving forward.  There are a LOT of parts  to clean, prime and mold but t is progressing.

- Files for the Berzerk, Virtual Viper, and Pegasus are ready to be printed.  More on them as they proceed.

JT-Graphics updates:

Being a one man shop and a full time job has it's draw backs.  As you can tell the web site is limping along.  Sorry but it's low priority compared to printing decals and mastering parts.  I have been able to make some more images so more decal pages should be up soon.

Speaking of mastering, I'm looking as some more Klingon stuff.  These are little details that I had forgotten about.  Look for them after the first of the year, maybe by Christmas.  There will also be a few more Oberth parts, some more 650 scale TOS accurizing and customizing parts. 

On the model front, we will be breaking the 3-in-1 into 3 separate kits soon at a lower price.  The USS Phobos has been printer and is in the process of being finalized before casting.  Expect to see it at Wonderfest 2011!

Additional News:

We are proud to announce an exclusive agreement between JT-Graphics and a NEW model company.  They will be specializing in only 1 scale and are producing some AWESOME kits.  We are expecting to have 10-20 offerings from them at Wonderfest 2011.  More on the (including their name) as time goes on.  (I'm trying to get some "Sneak Peak' pics now).  

Early Christmas:

The Holiday Season is upon us and it's time to SAVE !!!  You, we are doing it again.  From November 8th till December 31st we are offering FREE shipping in the USA and a flat $5.00 fee (per item)*, plus Registration fees for International Orders.  * (Smaller items such as Resin Parts, Photo Etch, Poster and such will be grouped together as 1 item for International Orders) 

2500 Scale decal page is up.

1/32 Scale Moebuis Models Battlestar Galactica Mk II Viper decals are Now Available.   

1600 Scale decal page is up.

24 Scale decal page is up (Starships).

Figure decals page is up.

Studio Scale decal page is up.

 New products are in the works for the old 18" TOS Enterprise Model.  Most of these are customizing pieces which may allow you to bring the old girl into the 2009 movie!  Confused? Stay tuned for more info.

In the next few weeks we hope to have a lot more pages up as well as new decal layouts available.  Stay tuned!

537 Scale decal page is up.

JTR-038 and JTR-038-C "Klingon Bulb" are now in stock.

We have been asked if we are still doing custom decals.  The short answer is YES, but ONLY if ordered directly through us.  We will suspend customer order during the months of April and May as we will be preparing for Wonderfest.

Speaking of Wonderfest,  In early May we will be able to give you some idea of he NEW product we will be bringing to the show.